Problem

To prevent gas emissions to atmosphere, a simple flare gas recovery system was required which could safely and economically compress low pressure waste gas back into the production process.

Solution

Transvac Flare Gas Recovery Ejectors are ideally suited to this application because they can employ high-pressure gas energy; from an existing source, to entrain and compress waste to a pressure where the gas can be used in the production process.

For this application the Transvac Ejector was designed to use high pressure motive gas from the 2nd stage Compressor discharge to entrain low pressure flare gas and to discharge into the inlet of the 1st stage Compressor.

The Gas Ejector was designed to handle the maximum flare gas flow conditions, but in order to maintain the desired pressure conditions on the low pressure side a simple control system is used to recycle make-up gas from the discharge of the Ejector.   

• Emission of greenhouse gases to atmosphere eliminated
  
  
• Potential reduction in tax liability
  
  
• Waste gas is recovered and added to production
  
  
• No running costs because existing energy used to motivate the Ejector
  
  
• Ejector has no moving parts
  
  
  

• No maintenance (very attractive for remote installations)
  
  
• Simple to install as part of existing pipework system
  
  
• Low cost option
  
  
• Safe, reliable operation
  
  
• Easy to control using standard techniques.